Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
ABS Actuator Checker Selector Switch Position
NOTE: When inspecting "FRONT RH" position, push the FRONT RH switch instead of the MAIN push switch, and you can inspect in any
selector switch position.
ABS Actuator Checker MOTOR Switch
(0) Push and hold in the MOTOR switch for a few seconds.
(p) Stop the engine.
5. Disconnect Actuator checker (SST) from Actuator.
Remove the "SHEET P" (SST) and disconnect the Actuator checker (SST) and sub-wire harness (SST) from the Actuator. SST O999O-OO150,
09990-00250, 09990-00300, 09990-00360, 09990-0430
6. Connect connectors.
Connect the 2 connectors to the Actuator.
7. Clear DTC. See Testing and Inspection - Procedures. See: Antilock Brakes / Traction Control Systems/Testing and Inspection
