Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
4. Assemble Special Service Tool (SST) Radiator Service Tool Set # 09230 - 01010 and Punch # 09231 - 14010 or equivalents.
(a)
Install the punch assembly to the overhaul handle, inserting it in the hole in part "A" as shown in the illustration.
(b) While gripping the handle, adjust the stopper bolt so that dimension "B" is as shown in the illustration.
Dimension: 8.4 mm (0.331 inch)
5. Caulk lock plate.
(a)
Lightly press SST Radiator Service Tool Set # 09230 - 01010 or equivalent against the lock plate in the order shown in the illustration. After
repeating this a few times, fully caulk the lock plate by squeezing the handle until stopped by the stopper plate.
NOTE:
^
Do not stake the areas protruding around the pipes, brackets or tank ribs.