Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Engine Oil Pressure: Testing and Inspection
1. Check engine oil quality.
Check the oil for deterioration, entry of water, discoloring or thinning.
If the quality is visibly poor, replace the oil.
Oil grade: API grade SH, Energy-Conserving II multigrade engine oil or ILSAC multigrade engine oil.
Recommended viscosity is as shown in the illustration, with SAE 5W-30 being the preferred engine oil.
2. Check engine oil level.
The oil level should be between the "L" and "F" marks on the dipstick.
If low, check for leakage and add oil up to "F" mark.
CAUTION:
^
When inserting the oil dipstick, insert the curved tip of the dipstick facing the same direction as the curve of the guide.
^
If the dipstick gets caught while inserting it, do not force it in. Reconfirm the direction of the dipstick.
3. Remove oil pressure switch, and install oil pressure gauge.
4. Warm up engine.
Allow the engine to warm up to normal operating temperature.
5. Check oil pressure.
Oil pressure:
At idle: 29 kPa (4.3 psi) or more.
At 3,000 rpm: 245 - 490 kPa (36 - 71 psi)
6. Remove oil pressure gauge, and reinstall oil pressure switch.
(a)
Remove the oil pressure gauge.
