Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Torque: 108 Nm (80 ft. lbs.)
9. Install camshaft timing pulley
a. Align the camshaft knock pin with the knock pin groove of the pulley, and slide on the timing pulley.
b. Using SST, install the pulley bolt.
SST 09249-63010, 09960-10010 (09962-01000, 09963-01000)
Torque:
54 Nm (40 ft. lbs.)
37 Nm (27 ft. lbs.) for use with SST
NOTE: Use a torque wrench with a fulcrum length of 340 mm (13.39 in.).
10. Set no.1 cylinder to TDC/compression
a. Turn the crankshaft pulley, and align its groove with timing mark "0" of the No.1 timing belt cover.
b. Using SST, turn the camshaft, and align the hole of the camshaft timing pulley with the timing mark of the bearing cap.
SST 09960-10010 (09962-01000, 09963-01000)
11. Connect timing belt to camshaft timing pulley.
