toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Idle Speed > < Pressure Specification|Page 2042
Page 2
background image

(1.5 kgf/cm square, 21 psi) or more 

If pressure is not as specified, check the fuel pump, pressure regulator and/or injectors.

(n) After checking fuel pressure, disconnect the negative (-) terminal cable from the battery and carefully remove the SST to prevent gasoline from

splashing. SST 09268-45012

(o) Reconnect the fuel inlet hose with 2 new gaskets and the union bolt.

Torque: 29 N.m (300 kgf.cm, 21 ft.lbf) 

(p) Reconnect the negative (-) terminal cable to the battery.
(q) Check for fuel leaks.

Idle Speed > < Pressure Specification|Page 2042