Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
3. Install generator drive belt adjusting bar.
(a)
Install the adjusting bar with the bolt.
Torque: 27 Nm (20 ft. lbs.)
(b) Install the crankshaft position sensor wire to the clamp on the adjusting bar.
(c)
Install the crankshaft position sensor connector to the bracket on the adjusting bar.
4. Install the A/C compressor.
5. Install No. 2 idler pulley.
6. Install timing belt tension spring.
7. Connect lower radiator hose to water inlet.
8. Install timing belt.
9. Fill with engine coolant.
10. Start engine and check for coolant leaks.
11. Install RH engine under cover.
