Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
4.
Install new exhaust support No. 4, (P/N 17565-11160).
5.
Confirm that clearance between tail pipe and heat shield (A - A' & B - B') is within specification.
A - A'
15-27 mm
(0.6 - 1.1 in.)
B - B'
20-30 mm
(0.8 - 1.2 in.)
NOTE:
If clearance is not within specification repeat steps 1 through 4 as required.
