Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
b. Using SST, remove the snap ring.
SST 07114-84020
REASSEMBLY NOTE: The snap ring should be installed so that its beveled side faces up.
c. Remove the stator.
REASSEMBLY
Reassembly is in the reverse order of disassembly.
CHECK CLEARANCE OF MAGNETIC CLUTCH
a. Set the dial indicator to the pressure plate of the magnetic clutch.
b. Connect the magnetic clutch lead wire to the positive (+) terminal of the battery.
c. Check the clearance between the pressure plate and rotor when connecting the negative (-) terminal to the battery.
Standard clearance:
0.5 ± 0.15 mm (0.020 ± 0.0059 in.)
If the clearance is not within the standard clearance, adjust the clearance using shims to obtain the standard clearance.
Shim Thickness:
0.1 mm (0.004 in.)
