Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
(b)
Remove the plate on the side of the heater unit using steps (1) and (2), indicated with bigger arrows to show direction, in the illustration.
CAUTION:
1. Do not bend the cable.
2. The plate will be reused.
(c)
Remove the blower resistor.
2.
Cleaning the Evaporator.
^
Follow the general procedures at the beginning of this bulletin.
3.
Reinstallation of parts.
(a)
Reinstall the plate on the side of the heater unit using steps (1) and (2), indicated with bigger arrows to show direction, in the illustration.
CAUTION:
Confirm that the plate is secure.
(b)
Restore the carpet to its original position taking care not to bend the cable.
Corolla (AE100)
1.
Removal of parts.
