Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
the current flowing through the warning light flows from TERMINAL 9 of the relay --> TERMINAL 10 --> GROUND, causing the warning
light to light up. A buckle SW OFF signal is input to TERMINAL 8 of the relay, the current flowing to TERMINAL 1 of the relay flows from
TERMINAL 10 --> GROUND and the seat belt warning buzzer sounds for approx. 6 Seconds. However, if the seat belt is put on during this
period (while the buzzer is sounding), signal input to TERMINAL 8 of relay stops and the current flow from TERMINAL 1 of the relay -->
TERMINAL 10 --> GROUND is cut, causing the buzzer to stop.
2. KEY REMINDER SYSTEM
With the Ignition key inserted in the key cylinder (unlock warning SW ON), the ignition SW still OFF and driver's door open (door courtesy SW
ON), when a signal is input to TERMINAL 6 of the relay, the integration relay operates, current flows from TERMINAL 1 of the relay -->
TERMINAL 10 --> GROUND and key reminder buzzer sounds.
Connector Joining Wire Harness and Wire Harness
Connector Joining Wire Harness And Wire Harness
Location Of Connector Joining Wire Harness And Wire Harness (Fig 46)
Ground Points
Ground Points
