Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Taillight: Diagram Information and Instructions
System Outline
When the Light Control SW is turned to TAIL or HEAD position. The current flows to TERMINAL 3 of the Light Failure Sensor through the TAIL
fuse.
When the Ignition SW is turned ON, the current flows from the GAUGE Fuse to TERMINAL 8 of the Light Failure Sensor, and also flows through the
Rear Light Warning Light to TERMINAL 4 of the Light Failure Sensor.
TAILLIGHT DISCONNECTION WARNING
With the Ignition SW ON and the Light Control SW turned to TAIL or HEAD position, if the Taillight Circuit is open, the Light Failure Sensor
detects the failure by the change in current flowing from TERMINAL 3 of the Light Failure Sensor to TERMINAL 9, and the warning circuit of
the Light Failure Sensor is activated.
As a result, the current flows from TERMINAL 4 of the Light Failure Sensor --> TERMINAL 11 --> GROUND and turns the Rear Lights
Warning Light ON, which remains ON until the Light Control SW is turned OFF.
Junction Block and Wire Harness Connector
Junction Block And Wire Harness Connector