Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
4. Visually inspect spark plugs.
Check the spark plug for thread damage and insulator damage.
If abnormal, replace the spark plug.
Recommended spark plug:
ND: PK20TR11
NGK:BKR6KPB11
5. Inspect electrode gaps.
Maximum electrode gap for used spark plug:
1.3 mm (0.051 in.)
If the gap is greater than maximum, replace the spark plug.
Correct electrode gap for new spark plug:
1.1 mm (0.043 in.)
NOTICE: If adjusting the gap of a new spark plug, bend only the base of the ground electrode. Do not touch the tip. Never attempt to adjust the
gap on the used plug.
6. Clean spark plugs.
If the electrode has traces of wet carbon, allow it to dry and then clean with a spark plug cleaner.
Air pressure:
Below 588 kPa (6 kgf/sq.cm, 85 psi)
Duration: 20 seconds or less
HINT: If there are traces of oil, remove it with gasoline before using the spark plug cleaner.
7. Reinstall spark plugs.
Using a 16 mm plug wrench, install the 4 spark plugs.
Torque: 18 N.m (180 kgf.cm, 13 ft.lbf)
