Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Torque: 29 N.m (300 kgf.cm, 21 ft.lbf)
Flare Nut Type:
(a) Apply a light coat of engine oil to the flare nut, and tighten the flare nut by hand.
(b) Using SST, tighten the flare nut to specified torque. SST 09631-22020
NOTICE: Do not rotate the fuel pipe, when tightening the flare nut.
Torque: 28 N.m (285 kgf.cm, 21 ft.lbf) for using SST
HINT: Use a torque wrench with a fulcrum length
of SO cm (11.81 in.).
3. Observe these precautions when removing and installing the injectors.
(a) Never reuse the O-ring.
(b) When placing a new O-ring on the injector, take care not to damage it in any way.
(c) Coat a new 0-ring with spindle oil or gasoline before installing-never use engine, gear or brake oil.
Injector Installation - California Only
