Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Circuit Opening Relay: Testing and Inspection
CIRCUIT OPENING (FUEL PUMP) RELAY INSPECTION
1. Remove relay box cover.
2. Remove circuit opening relay. (Marking: CIR OPN)
3. Inspect circuit opening relay continuity.
(a) Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.
(b) Check that there is no continuity between terminals 3 and 5.
If there is continuity, replace the relay.
4. Inspect circuit opening relay operation.
(a) Apply battery voltage across terminals 1 and 2.
(b) Using an ohmmeter, check that there is continuity between terminals 3 and 5.
If there is no continuity, replace the relay.
5. Reinstall circuit opening relay.
6. Reinstall relay box cover.
