Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Air Bag Control Module: Service and Repair
Removal
Removal
REMOVAL
NOTICE: Do not open the cover or the case of the ECU and various computers unless absolutely necessary. (If the IC terminals are touched, the IC
may be destroyed static electricity.)
REMOVE AIRBAG SENSOR ASSEMBLY
a. Disconnect the connector.
NOTICE: Remove the connector with the sensor assembly installed.
b. Using a torx wrench remove the 3 screws and the airbag sensor assembly.
Torx wrench: T40 (Part No. 09042-00020 or locally manufactured tool)
INSTALLATION
NOTICE:
^
Never use SRS parts from another vehicle. When replacing parts, replace with new parts.
^
Never reuse the airbag sensor assembly involved a collision when the airbag has deployed.
^
Never repair a sensor in order to reuse it.
Removal
