toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Wiper Switch|Locations|Page 1431 > < Wiper Switch|Locations|Page 1429
Page 2
background image

1. INSPECT FRONT WIPER AND WASHER SWITCH CONTINUITY

If continuity is not as specified, replace the switch.

2. INSPECT INTERMITTENT OPERATION

a. Turn the wiper switch to INT position.
b. Turn the intermittent time control switch to FAST position

c. Connect the positive (+) lead from the battery to terminal 16 and the negative (-) lead to terminal 2.
d. Connect the positive (+) lead from the voltmeter to terminal 7 and the negative (-) lead to terminal 2, check that the meter needle indicates

battery positive voltage.

Wiper Switch|Locations|Page 1431 > < Wiper Switch|Locations|Page 1429