Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
e. After connecting terminal 16 to terminal 17, connect to terminal 2, check the voltage rises from 0 Volts to battery positive voltage with in the
times, as shown in the table.
If operation is not as specified, replace the wiper and washer switch.
3. INSPECT WASHER LINKED OPERATION
a. Connect the positive (+) lead from the battery to terminal 16 and the negative (-) lead to terminal 2.
b. Connect the positive (+) lead from the voltmeter to terminal 7 and the negative (-) lead to terminal 2.
c. Push in the washer switch, and check that the voltage changes as shown in the table.
If operation is not as specified, replace the wiper and washer switch.
4. INSPECT FRONT WIPER MOTOR OPERATION
Low Speed:
Connect the positive (+) lead from the battery to terminal 5 and the negative (-) lead to terminal 4, check that the motor operates at low speed.
If operation is not as specified, replace the motor.
