Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
b. Using a feeler gauge, measure the clearance between the rotor groove and plate.
Maximum Clearance: 0.035 mm (0.0014 inch).
NOTE:
^
If more than the maximum, replace the plate and/or rotor with one having the same mark stamped on the cam ring.
Inscribed Mark: 1, 2, 3, 4 or None
^
There are 5 vane lengths with the following rotor and cam ring marks:
Rotor And Cam Ring Mark:
None:
Vane Plate Part Number: 44345 - 26010
Vane Plate Length: 14.999 - 15.001 mm (0.59051 - 0.59059 inch).
1:
Vane Plate Part Number: 44345 - 26020
Vane Plate Length: 14.997 - 14.999 mm (0.59043 - 0.59051 inch).
2:
Vane Plate Part Number: 44345 - 26030
Vane Plate Length: 14.995 - 14.997 mm (0.59035 - 0.59043 inch).
3:
Vane Plate Part Number: 44345 - 26040
Vane Plate Length: 14.993 - 14.995 mm (0.59027 - 0.59035 inch).
4:
Vane Plate Part Number: 44345 - 26050
Vane Plate Length: 14.991 - 14.993 mm (O.59020 - 0.59027 inch).
3. Inspect flow control valve.
a. Coat the valve with power steering fluid and check that it falls smoothly into the valve hole of the front housing by its own weight.
