Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
a. Remove the bolt and disconnect the parking brake cable.
[Torque: 5.4 Nm (48 inch lbs.)]
b. Remove the 2 bolts and nuts.
[Torque: 113 Nm (83 ft. lbs.)]
Installation Note: After stabilizing the suspension, torque the bolts.
c. Remove the strut rod.
4. Remove No.2 lower suspension arm.
a. Remove the 3 nuts, suspension arm washer and washers.
[Torque: 181 Nm (134 ft. lbs.)]
Installation Note: After stabilizing the suspension, torque the nuts.
b. Remove the No.2 lower suspension arm.
Installation Note: Face the paint mark to the rearward.
NOTE: For No.2 lower arm service continue with step 5, for removing the rest of the lower suspension go to step 6.
5. No.2 lower suspension arm overhaul.
a. Disassemble No.2 lower suspension arm.
1. Loosen the 2 lock nuts.
2. Turn and disassemble the No.2 lower suspension arm.
3. Remove the lock nuts from the No.2 lower suspension arm.
b. Assemble No.2 lower suspension arm
1. Install the 2 lock nuts to the No.2 lower suspension arm.