Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
a. Align the 'OUT' mark of spring upper seat with the mark of the upper insulator.
b. Install the spring upper seat with upper insulator to the shock absorber with the mark facing the outside of the vehicle.
c. Install the bearing and suspension support.
d. Using SST 09729 - 22031 to hold the suspension support, install a new nut and torque to 49 Nm (36 ft. lbs.).
e. Remove the SST from the coil spring.
CAUTION: Check that the bearing fits into the recess in the suspension support.
