Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
K.
Install the oil cooler onto the center brace and front cross member using the two bolts and nut as illustrated in figure 12.
Torque:
65.5 in-lbf
(7.4 N.m /75.5 kgf-cm)
L.
Connect the hoses to the pipes.
NOTE:
Install the hose clamps with the hose clamp clips at the positions shown, and use pliers to pull off the dips in the direction indicated by the
arrows.
3.
Final Assembly:
A.
Reconnect the coolant temperature switch connector and wire clamp as illustrated in figure 14.
B.
Install the cooling fan with 2 bolts.
