Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Wheel Bearing: Service and Repair
Front
Removal
NOTE: To perform the following procedure the Steering Knuckle should be removed, refer to Steering and Suspension.
PROCEDURE
1. Remove dust deflector, using a screwdriver.
2. Remove lower ball joint.
a. Remove the cotter pin and nut.
b. Using Special Service Tool (SST) 09628 - 62011, remove the lower ball joint.
3. Remove axle hub.
a. Using SST 09520 - 00031, remove the axle hub.
b. Using SST 09950 - 00020, 09950 - 60010 (09951 - 00400), 09950 - 70010 (09951 - 07100) and a press, remove the inner race (outside) from
the axle hub.
4. Remove dust cover. Using a torx wrench (T30), remove the 4 bolts and dust cover.
5. Remove bearing from steering knuckle.
