Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Wiper Motor: Description and Operation
When the Ignition SW turned ON, current flows to TERMINAL 17 of the Wiper And Washer SW, TERMINAL 2 of the Washer Motor and
TERMINAL 2 of the Front Wiper Motor through the WIPER fuse.
1. LOW SPEED POSITION
With the Wiper and Washer SW turned to LO position, the current flows from TERMINAL 17 of the Wiper and Washer SW --> TERMINAL 7
--> TERMINAL 5 of the Front Wiper Motor --> TERMINAL 4 --> GROUND and causes the Front Wiper Motor to run at Low Speed.
2. HIGH SPEED POSITION
With the Wiper and Washer SW turned to HI position, the current flows from TERMINAL 17 of the Wiper and Washer SW --> TERMINAL 8
--> TERMINAL 3 of the Front Wiper Motor --> TERMINAL 4 --> GROUND and causes the Front Wiper Motor to run at High Speed.
3. INT POSITION
With the Wiper and Washer SW turned to INT position, the Wiper Relay operates and current flows from TERMINAL 17 of the Wiper and
Washer SW --> TERMINAL 2 --> GROUND. This activates the Intermittent Circuit and the current flows from TERMINAL 17 of the Wiper
and Washer SW --> TERMINAL 7 --> TERMINAL 5 of the Front Wiper Motor --> TERMINAL 4 --> GROUND and the Wiper operates.
Intermittent operation is controlled by a condenser charge and discharge function in the relay.
4. WASHER CONTINUOUS OPERATION
With the Wiper and Washer SW pulled to WASHER position (washer SW ON position), the current flows from the WIPER fuse to
TERMINAL 2 of the Washer Motor --> TERMINAL 1 --> TERMINAL 11 of the Wiper and Washer SW --> TERMINAL 2 --> GROUND
and causes the Washer Motor to run and the window washer to spray. Simultaneously, current flows from the WIPER fuse to TERMINAL 17 of
the Wiper and Washer SW --> TERMINAL 7 --> TERMINAL 5 of the Front Wiper Motor --> TERMINAL 4 --> GROUND, causing the
Wiper to function.
