Celica L4-1.8L (1ZZ-FE) (2004)
/Page-1265006.png)
a. Operate the wiper motor once and turn the wiper switch OFF.
b. Install the rear wiper arm and tighten the nut by hand.
c. Adjust the installation position of the wiper arm at a point in defogger pattern.
d. Tighten the nut.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
15. w/ Rear spoiler:
REMOVE REAR SPOILER
