Celica L4-1.8L (1ZZ-FE) (2004)
/Page-1199003.png)
-
Never use SRS parts from another vehicle. When replacing parts, replace them with new parts.
-
Never reuse the sensor involved in a collision when the SRS has deployed.
-
Never repair a sensor in order to reuse it.
1. LH.
REMOVE FRONT AIRBAG SENSOR
a. Remove the air cleaner hose.
b. Remove the air cleaner cap.
c. Remove the air filter.
d. Remove the 2 bolts and air cleaner case.
e. Disconnect the connector.
NOTE: Disconnect the connector with sensor assembly installed.
f.
Remove the 2 bolts and front airbag sensor LH.
2. RH:
REMOVE FRONT AIRBAG SENSOR
a. Remove the 5 clips and upper front fender apron seal.
b. Disconnect the connector.
NOTE: Disconnect the connector with sensor assembly installed.
c. Remove the 2 bolts and front airbag sensor RH.
INSTALLATION
