Celica L4-1.8L (1ZZ-FE) (2004)
2. 1ZZ-FE:
REMOVE CAMSHAFT POSITION SENSOR
a. Disconnect the connector.
b. Remove the bolt and camshaft position sensor.
Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf)
3. 2ZZ-GE:
REMOVE CAMSHAFT POSITION SENSOR
a. Disconnect the connector.
b. Remove the 2 bolts and camshaft position sensor.
Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf)
INSTALLATION
Installation is in the reverse order of removal.