Celica L4-1.8L (1ZZ-FE) (2004)
6. INSTALL INLET UNION
a. Install a new grommet.
b. Install the inlet union.
c. Using a pin punch (3 mm) and hammer, drive in the slotted spring pin.
INSTALLATION
1. INSTALL MASTER CYLINDER WITH 2 MOUNTING NUTS
Torque: 12 Nm (120 kgf-cm, 9 ft. lbs.)
2. INSTALL PIN AND CLIP
3. CONNECT CLUTCH LINE
Using SST, connect the clutch line.
SST 09023-00100
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
4. CONNECT RESERVOIR HOSE
a. Connect the reservoir hose to the inlet union.
NOTICE: Facing the yellow mark upwards.
b. Using pliers, connect the clip.
5. INSTALL BRAKE BOOSTER
6. FILL BRAKE RESERVOIR WITH BRAKE FLUID AND BLEED CLUTCH SYSTEM
7. ADJUST CLUTCH PEDAL
8. CHECK FOR LEAKS