Celica L4-1.8L (2ZZ-GE) (2005)
Using a 5 mm hexagon wrench, remove the bolt and oil nozzle.
INSPECTION
INSPECT RELIEF VALVE (OIL NOZZLE)
Push the valve with a wooden stick to check if it is stuck. If stuck, replace the relief valve.
INSTALLATION
1. INSTALL OIL NOZZLE (WITH RELIEF VALVE)
Using a 5 mm hexagon wrench, install the oil nozzle with the bolt.
Torque: 9.0 Nm (92 kgf-cm, 80 inch lbs.)
2. INSTALL CRANKSHAFT