Celica L4-1.8L (2ZZ-GE) (2005)
12. REMOVE CRANKSHAFT PULLEY
(a) Using SST, remove the pulley bolt.
SST 09960-10010 (09962-01000, 09963-01000)
(b) Remove the crankshaft pulley from the crankshaft.
13. DISCONNECT CRANKSHAFT POSITION SENSOR FROM TIMING CHAIN COVER
Remove the 2 bolts and crankshaft position sensor.
14. REMOVE DRIVE BELT TENSIONER
Remove the bolt, nut and drive belt tensioner.
15. REMOVE RH ENGINE MOUNTING BRACKET
(a) 1ZZ-FE: Remove the 3 bolts and mounting bracket.
(b) 2ZZ-GE: Remove the 4 bolts and mounting bracket.
16. 2ZZ-GE: REMOVE FRONT EXHAUST PIPE
17. 2ZZ-GE: REMOVE EXHAUST MANIFOLD STAY
18. 2ZZ-GE: REMOVE EXHAUST MANIFOLD
19. REMOVE CHAIN TENSIONER
Remove the 2 nuts and chain tensioner.
20. REMOVE WATER PUMP