Removal and Installation of Condenser HVAC Component - Celica L4-18L (2ZZ-GE) (2005)
Condenser HVAC: Service and Repair
Replacement
REPLACEMENT
REPLACE DRYER FROM MODULATOR
a. Using a hexagon wrench (10 mm, 0.39 in.), remove the cap from the modulator.
b. Remove the filter from the modulator.
c. Using pliers, remove the dryer.
d. Insert a new dryer into the modulator.
NOTE:
-
Do not remove the dryer from a vinyl bag until inserting it into the modulator.
-
Install the dryer with its 2 layered part faced upward to the modulator.