Celica L4-1.8L (2ZZ-GE) (2005)
/Page-436001.png)
Malfunction Indicator Lamp: Testing and Inspection
MIL CIRCUIT
CIRCUIT DESCRIPTION
The ignition switch provides circuit power and the ECM provides the circuit ground that illuminates the MIL. MIL operation is checked visually:
It should be illuminated when the ignition is first turned on. If the MIL is off all of the time or on all of the time, use the procedure below to troubleshoot
it. The MIL is used to indicate the ECM's detection of vehicle malfunction. Follow this procedure using the hand-held tester or an OBD II scan tool to
determine the cause of the problem and to check the MIL.
Wiring Diagram
