Celica L4-1.8L (2ZZ-GE) (2005)
Safing Sensor: Description and Operation
AIRBAG SENSOR ASSEMBLY
The airbag sensor assembly is mounted on the floor inside the lower center finish panel. The airbag sensor assembly consists of an airbag sensor, safing
sensor, diagnosis circuit, ignition control, drive circuit, etc. It receives signals from the airbag sensor, front airbag sensor, side airbag sensor assembly
and door side airbag assembly and judges whether the SRS must be activated or not. The airbag sensor assembly cannot be disassembled.
SIDE AIRBAG SENSOR ASSEMBLY
The side airbag sensor assembly is mounted in the LH and RH center pillars. The side airbag sensor assembly consists of a lateral deceleration sensor,
safing sensor, diagnosis circuit, etc. It sends signals to the airbag sensor assembly to judge whether the SRS side airbag must be activated or not. The
side airbag sensor assembly cannot be disassembled.