Celica L4-1.8L (2ZZ-GE) (2005)
c. Remove the terminal kit parts.
1. Using SST, loosen the terminal nuts.
SST 09810-38140
2. Terminal C:
Remove the terminal nut, wave washer, terminal insulator (outside), O-ring, terminal bolt, contact plate and terminal insulator (inside).
3. Terminal 30:
Remove the terminal nut, wave washer, terminal insulator (outside), packing, O-ring, terminal bolt, contact plate, and terminal insulator
(inside).
d. Temporarily install a new terminal 30 kit parts.
1. Install a terminal insulator (inside).
NOTE: Be careful to install the terminal insulator in the correct direction.
2. Install a contact plate.
3. Install a terminal bolt.
4. Install a O-ring.
5. Install a packing and terminal insulator (outside). Install the packing to the terminal insulator, and install them.
HINT: Match the protrusion of the insulator with the indentation of the housing.
6. Install a wave washer.
7. Install a terminal nut.
e. Temporarily install new terminal C kit parts.
1. Install a terminal insulator (inside).
2. Install a contact plate.
3. Install a terminal bolt.
4. Install a O-ring.
5. Install a terminal insulator (outside).
6. Install a wave washer.
7. Install a terminal nut.
NOTE: Be careful to install the terminal insulator (inside) in the correct direction.
f.
Temporarily tighten the terminal nuts.
g. Tighten terminal nut.