Celica L4-1.8L (2ZZ-GE) (2005)
Control Arm: Service and Repair
Rear
Lower
REMOVAL
1. REMOVE REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
2. REMOVE ABS SPEED SENSOR WIRE HARNESS CLAMP
Remove the bolt and disconnect the ABS speed sensor wire harness clamp.
Torque: 19 Nm (194 kgf-cm, 14 ft. lbs.)
3. REMOVE TAILPIPE
Remove the 2 bolts, springs, gasket, 3 O-rings and tailpipe.
Torque: 43 Nm (440 kgf-cm, 32 ft. lbs.)