Celica L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1990)
Brake Shoe: Service and Repair
Removal
REMOVAL OF REAR BRAKES
Remove the inspection hole plug, and check the shoe lining the thickness through the hole. If less than minimum, replace the shoes.
Minimum thickness: 1.0 mm (0.039 in.)
Remove rear wheel
Remove brake drum
NOTE: If the brake drum cannot be removed easily, perform the following steps.
-
Insert a bent wire or an equivalent through the hole in the brake drum, and hold the automatic adjusting lever away from the adjuster.