toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 1127 > < Diagram Information and Instructions|Page 1125
Page 1
background image

Radiator Cooling Fan Motor: Testing and Inspection

ELECTRIC COOLING FAN COMPONENTS

ON-VEHICLE INSPECTION

Low Temperature (Below  83°C (181°F)

1. TURN IGNITION SWITCH "ON"

Check that the fan stops
If it does not, check the cooling fan relay and water teperature switch, and check for a separated connector or severed wire between the cooling fan
relay and water ternperature switch.

2. DISCONNECT WATER TEMPERATURE SWITCH CONNECTOR

Check that fan rotates.
If not, check the cooling fan relay, fan motor, engine main relay and fuse, and check for a short circuit between the cooling fan relay and water
temperature switch.

3. CONNECT WATER TEMPERATURE SWITCH CONNECTOR

High Temperature (Above 93°C (199°F))

4. START ENGINE

Diagram Information and Instructions|Page 1127 > < Diagram Information and Instructions|Page 1125