Celica L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1990)
Alignment: Service and Repair
Front
Caster & Camber
Caster and camber is not adjustable. If measurements are not within specifications, inspect suspension components for damage or excessive wear.
Replace as necessary.
Toe-In
Measure length of tie rod end on each side and adjust to be equal. Adjust toe-in by turning tubes equal amounts. Clamp adjusting tubes after aligning
clamps with tube slots. Lock tie rod ends so that inner and outer ends are at right angles to each other.