Celica L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1990)
3. INSTALL SNAP RING
Using a brass bar and hammer, install the snap ring and spring seat.
4. INSTALL SELECT INNER LEVER
a. Install the No.1 spring seat, No.1 select spring and select inner lever, as shown.
b. Using a pin punch and hammer, drive in the slotted spring pin.
5. INSTALL SHIFT INTERLOCK PLATE AND NO.1 SHIFT INNER LEVER
a. Install the shift interlock plate and No.1 shift inner lever.
b. Using a pin punch and hammer, drive in the slotted spring pin.
c. Check that the shift Interlock plate turns smoothly.