Celica L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1990)
/Page-873002.png)
(Left Case Side)
Using SST, remove the side bearing.
SST 09950-20017
4. CHECK RING GEAR RUNOUT
a. Install the mounting right case to the left case.
b. Using a dial indicator, check the ring gear runout.
Maximum runout: 0.1 mm (0.004 in.)
c. Remove the mounting right case from the left case.
5. REMOVE RING GEAR
a. Place the matchmarks on both the mounting left case and ring gear.
b. Using a plastic hammer, tap out the ring gear.
