Celica L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
/Page-175006.png)
(When matchmark is out of alignment on counterclockwise)
^
Align the matchmark by pulling the timing belt up on the No.1 idler pulley side while turning the crankshaft pulley clockwise.
^
After aligning the matchmark, hold the timing belt. And turn the crankshaft pulley counterclockwise, and align its groove with timing mark
"0" of the No.1 timing belt cover.
(b) Using SST 09213-60017 (09213-00020, 09213-00030, 09213-00050), remove the pulley.
HINT: (When re-using timing belt)
Remove the pulley without turning it.
20. Remove No.1 timing belt cover.
Remove the four bolts, timing belt cover and gasket.
