Celica L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
(b) Using SST 09249-63010 and 09278-54012, install the plate washer and bolt.
Torque: 54 N.m (550 kgf.cm, 40 ft.lbf) 37 N.m (380 kgf.cm, 27 ft.lbf) for SST
HINT: Use a torque wrench with a fulcrum length of 340 mm (13.39 in.)
10. Set No.1 cylinder to TDC/Compression.
(a) Turn the crankshaft pulley, and align its groove with timing mark "0" of the No.1 timing belt cover.
(b) Using SST 09278-54012, turn the camshaft, and align the hole of the camshaft timing pulley with the timing mark of the bearing cap.
11. Install timing belt.
HINT: (When re-using timing belt)
^
Check that the matchmark on the timing belt matches the end of the No.1 timing belt cover.
^
If the matchmark does not align, shift the meshing of the timing belt and crankshaft timing pulley until they align.