Celica L4-2366cc 22R (1983)
8. Remove the three nuts, four bolts and cooling unit.
9. Remove idling stabilizer amplifier.
10. Remove A/C wire harness from cooling unit.
INSTALLATION
1. Install A/C wire harness to cooling unit.
2. Install the cooling unit with the three nuts and four bolts.
CAUTION: Be careful not to pinch the wiring harness while installing the cooling unit.
3. Install following components:
a. Side air duct
b. Glove box with undercover
4. Install grommets on inlet and outlet fittings.
5. Connect liquid line tube to cooling unit inlet fitting.
Torque: 12 - 14 Nm (9 - 10 ft-lb)
