Trailing Arm Component Service and Repair Instructions
Trailing Arm: Service and Repair
Fig. 4 Exploded view of rear suspension components (typical). Exc. MR2 & Late 1986-88 Supra
1.
Raise rear of vehicle and support with jackstands positioned at frame members.
2.
Disconnect stabilizer bar end from suspension arm, Fig. 4.
3.
Disconnect driveshaft from axle shaft and position out of the way.
4.
Remove rear axle shaft flange, brake drum or rotor and rear axle shaft. Refer to ``Axle Shaft, Bearing & Oil Seal, Replace'' procedure under Exc.
