Celica L4-96.8 1587cc 1.6L DOHC (4A-FE) (1990)
Doors: Technical Service Bulletins
Windows - Door Glass Adjustment Procedures
REFERENCE BODY
NUMBER
053
DATE
12-28-90
MODEL
AT, ST
TITLE 1990 CELICA DOOR ADJUSTMENT/REPAIR PROCEDURES
This information is to correct an omission in the 1990 Celica Repair Manual door glass adjustment procedures.
CONDITION:
The door trim supports, page BO-12 of the 1990 Celica Repair Manual, are not adjustable. There are three (3) different part numbers to accommodate
varied door panel opening widths (see illustration).
CORRECTION:
Measure the width of the door panel opening and select the correct support according to the chart below. Proper measurements should be taken with the
door glass and belt molding removed.
Opening width mm(in.)
Stamped no.
Part Number
32.0 (1.26)
1
67231-20051
32.1 (1.26)-34.1(1.34)
2
67231-20061
34.2 (1.35)
3
67231-20071
NOTE:
This procedure should only be necessary in case of body damage or door replacement.