Celica L4-96.8 1587cc 1.6L DOHC (4A-FE) (1990)
-
Install dust boots and sliding bushing
-
lnstall the dust boots into the brake cylinder.
-
Insure that the boot is secured firmly to the brake cylinder groove.
-
Install the bushing into the boots.
-
Insure that the boot is secured firmly to the bushing groove.
REINSTALL CALIPER
-
Install pads
-
Install cylinder
-
Install flexible hose to brake cylinder
-
Set the flexible hose and new gaskets in position and install the union bolt.
Torque: 30 Nm (22 ft lb)