Celica L4-96.8 1587cc 1.6L DOHC (4A-FE) (1990)
-
Check the pad thickness through the cylinder inspection hole and replace pads if not within specification.
Minimum thickness: 1.0 mm (0.039 in.)
-
Remove the installation bolt from the torque plate.
-
Remove the brake cylinder and suspend it so the hose is not stretched.
NOTE: Do not disconnect the brake hose.
-
Remove following parts:
-
Two brake pads
-
Three anti-squeal shims
-
Four pad support plates
-
Check rotor disc thickness
-
Check rotor disc runout