Celica L4-96.8 1587cc 1.6L DOHC (4A-FE) (1990)
-
Using SST, install the front return spring and then install the rear return spring. (SST 09718-20010)
-
Install shoe return springs [2WD (w/o A.B.S.)]
-
Using needle-nose pliers, install the shoe return springs.
-
Before installing, polish the disc and shoe surfaces with sandpaper.
-
Align the hole on the rear axle shaft flange and service hole on the disc.
-
Temporarily install the hub nuts.
-
Remove the hole plug.
-
Turn the adjuster and expand the shoes until the rotor disc locks.
-
Return the adjuster eight notches.
-
Install the hole plug.