Celica L4-96.8 1587cc 1.6L DOHC (4A-FE) (1990)
/Page-1199001.png)
Control Assembly: Testing and Inspection
Push Type Controls
INSPECT CABLE ADJUSTMENT
Adjust water valve control cable.
Set the water valve and the temperature control switch to "COOL", then install the control cable and lock the clamp.
NOTE: Set the switch to "COOL" when the ignition switch is turned ON and the blower is operating.
INSPECT ILLUMINATION
1. Connect the positive (+) lead from the battery to terminal C-15 and the negative (-) lead to terminal C-13.
2. Check that the illumination lights up.
If the illumination does not light up, test the bulb.
Indicators