Celica L4-96.8 1587cc 1.6L DOHC (4A-FE) (1990)
Receiver Dryer: Service and Repair
REMOVAL
1. Recover refrigerant from refrigeration system.
2. Disconnect two liquid tubes from receiver.
NOTE: Cap the open fittings immediately to keep moisture out of the system.
3. Remove receiver from receiver holder.
INSTALLATION
1. Install receiver in receiver holder.
NOTE: Do not remove the blind plugs until ready for connection.
2. Connect two liquid tubes to receiver
Torque: 13 Nm (10 ft lb)
3. If the receiver was replaced, add compressor oil to the compressor.
Additional oil: 20 cc (0.7 fl.oz) ND oil 6, Suniso No. 5GS or equivalent.
4. Evacuate air from air conditioning system.
5. Charge air conditioning system with refrigerant and check for gas leakage.
Refill capacity: 750 ± 50g (26.5 ± 1.8 oz)