Celica L4-96.8 1587cc 1.6L DOHC (4A-FE) (1990)
/Page-247004.png)
cap.
9. Install timing belt.
HINT: (When re-using timing belt)
^
Check that the matchmark on the timing belt matches the end of the No.1 timing belt cover. If the matchmark does not align, shift the meshing
of the timing belt and crankshaft timing pulley until they align.
^
Align the matchmarks of the timing belt and camshaft timing pulley.
(a) Remove any oil or water on the camshaft timing pulley, and keep it clean.
(b) Install the timing belt, checking the tension between the crankshaft timing pulley and camshaft timing pulley.
10. Check valve timing.
(a) Loosen the idler pulley bolt 1/2 turn.
